Product Code: SG-SENSORBOX-KIT-B
Weather Station SunGuard RS485 24VDC IP65 with irradiation sensor, module temperature sensor, ambient temperature sensor and anemometer.
The weather station SG-SENSORBOX-KIT-B is able to detect environmental data through the sensors connected to SunGuard Sensor Box (SG-SENSORBOX): the primary radiation sensor (SG-IRR210), which measures the solar radiation on the basis inclination and orientation of PV modules, the temperature sensor module (SG-PT100-M), the temperature sensor (SG-PT1000-A) and anemometer (SG-ANEMO), to measure 'wind velocity.
Specifications of SG-IRR210 |
|
Range of measurement | 50 - 1500 W/m² |
Tipe of Sensor | Cella monocristallina (20 mm / 24 mm) |
Sensor accuracy | ±5 % on an annual basis |
Electrical output | C. 75 mV a 1000 W/m² |
Calibration | Simulator Solar Constant 1200 with a sensor calibrated by the ISE |
Construction of the sensor | Novaflon laminate and EVA foil |
Container | Polycarbonate, UV stabilized with PG screw |
Type of connection | Cable, 3 m, 2 x 1.0 mm² |
Mounting | Drilling of 6 mm for screw fixing |
Dimensions (WxHxD) | 55 x 55 x 10 mm |
Weight | 200 g |
Warranty | 2 year |
Standards | CE |
Specifications of SG-PT100-M | |
Range of measurement | -20°C ~ +150°C |
Class of insulation | Ip65 |
Container | Aluminum plate, including adhesive tape |
Principle of measurement | Platinum resistance wire, Pt100, 3-wire |
Type of connection | Cable, 3 mt, for three-wire connection |
Dimensions (WxHxD) | 50 x 50 x 1 mm |
Warranty | 2 years |
Standards | CE |
Specifications of SG-PT1000-A | |
Range of measurement | -20°C - +150°c |
Class of insulation | IP 56 |
Container | Housing in Makrolon polycarbonate, UV stabilized with PG screw |
Principle of measurement | Resistance wire made of platinum |
Type of connection | 3 m cable, 2-wire connection |
Dimensions (WxHxD) | 52 x 50 x 32 mm |
Weight | 120 g |
Warranty | 2 years |
Standards | CE |
Specifications of SG-ANEMO | |
Power | 5-24 VCC |
Class of insulation | IP65 |
Maximum current | 15mA |
Range | 2-200 Km/h |
Resolution | Over 1 Km/h |
Precision | ±2% |
Repeatability | 0.5% |
Linearity | ±2% |
Storage Temperature | -40°C/+100°C |
Operating Temperature | -20°C/+80°C |
Weight | 154 gr |
Dimensions (H x Ø) | 138.5 x 123.6 mm |
Support | Included mounting bracket aluminum |
Specifications of SG-SENSORBOX | |
Power | 24 VDC |
Absorption | 150mA |
Serial Ports | RS485 |
Communication protocol | ModBUS |
Class of insulation | Polycarbonate IP65 IP68 with cable (required for connecting to the environmental sensors) |
Class of insulation of the sensors | IP65 |
Dimensions (WxHxD) | 220 x 140 x 140 mm |
Sensors can be connected | - Primary Radiation Sensor (SG-IRR210); - The secondary radiation sensor (SG-IRR0/10); - Temperature sensor module (SG-PT100-M); - Room temperature sensor (PT1000-A-SG); - Anemometer (SG-ANEMO); - Pyranometro (SG-PYRA-3-AV); - Temperature sensor for internal USB (USB-SG-T). |
Inputs | - Input mV (range 0/10): for the primary radiation sensor (SG-IRR210); - Input 0-10V: for secondary radiation sensor (SG-IRR0/10) and pyranometer (SG-PYRA-3-AV); - Input PT1 (PT100 or PT1000 (selectable via jumper) two-wire or three wire (selectable via jumper)): for temperature sensor module (SG-PT100-M) and temperature sensor (PT1000-A-SG) ; - Input PT2 (PT100 or PT1000 (selectable via jumper) two-wire or three wire (selectable via jumper)): for temperature sensor module (SG-PT100-M) and temperature sensor (PT1000-A-SG) ; - Input for anemometer: wind speed sensor (SG-ANEMO). |