Product Code: SG-SENSORBOX2-KIT-IR2
Weather Station SunGuard RS485 24VDC IP65 with double radiation sensor (SG-IRR210B SG-IRR0/10 +) and room temperature.
The weather station SG-SENSORBOX2-KIT-IR2 is able to detect environmental data through the sensors connected to SunGuard Sensor Box (SG-SENSORBOX): the primary radiation sensor (SG-IRR210B), which measures the solar radiation on the basis the inclination and orientation of the photovoltaic modules, the secondary radiation sensor (SG-IRR0/10), used in case the panels that make up the photovoltaic system have tilting and / or different orientation, and the ambient temperature sensor (SG-PT1000-A).
Specifications of SG-PT1000-A | |
Range of measurement | -20°C - +150°c |
Class of insulation | IP 56 |
Container | Housing in Makrolon polycarbonate, UV stabilized with PG screw |
Principle of measurement | Resistance wire made of platinum |
Type of connection | 3 m cable, 2-wire connection |
Dimensions (WxHxD) | 52 x 50 x 32 mm |
Weight | 120 g |
Warranty | 2 years |
Standards | CE |
Specifications of SG-IRR210B |
|
Range of measurement | 0 - 1500 W/m² |
Tipe of Sensor | Cella monocristallina (20 mm / 24 mm) |
Sensor accuracy | ±5 % on an annual basis |
Electrical output | C. 75 mV a 1000 W/m² |
Calibration | Simulator Solar Constant 1200 with a sensor calibrated by the ISE |
Construction of the sensor | Novaflon laminate and EVA foil |
Container | Z-profiled aluminum plate, connection casting |
Type of connection | Cable (optional) |
Mounting | Drilling of 6 mm for screw fixing |
Dimensions (WxHxD) | 140 x 60 x 92 mm |
Weight | 200 g |
Warranty | 2 year |
Standards | CE |
Specifications of SG-IRR0/10 | |
Range of measurement | 0 - 1500 W/m² |
Type of sensor | Monocrystalline cell (33 mm / 50 mm) |
Sensor accuracy | ±5 % on an annual basis |
Electrical output | 4 - 20 mA o 0 - 10 V o 0 - 3.125 V o 0 - 150 mV |
Calibration | Simulator Solar Constant 1200 with a sensor calibrated by the ISE |
Construction of the sensor | Encapsulation in the measuring cell glass |
Power Consumption | C. 30 mW |
Container | Polycarbonate, UV stabilized with PG screw |
Type of connection | Connection terminals, 1.5 mm² |
Mounting | Drilling for screw fixing and rear slot for mounting clamps |
Dimensions (WxHxD) | 140 x 60 x 92 mm |
Weight | 300 g |
Warranty | 2 year |
Standards | CE |
Specifications of SG-SENSORBOX2 | |
Power | 24 VDC |
Absorption | 150mA |
Serial Ports | RS485 |
Communication protocol | ModBUS |
Class of insulation | Polycarbonate IP65 IP68 with cable (required for connecting to the environmental sensors) |
Class of insulation of the sensors | IP65 |
Dimensions (WxHxD) | 220 x 140 x 140 mm |
Sensors can be connected | - Primary Radiation Sensor (SG-IRR210B); - The secondary radiation sensor (SG-IRR0/10); - Temperature sensor module (SG-PT100-M); - Room temperature sensor (PT1000-A-SG); - Anemometer (SG-ANEMO); - Pyranometro (SG-PYRA-3-AV); - Temperature sensor for internal USB (USB-SG-T). |
Inputs | - Input mV (range 0/100): for the primary radiation sensor (SG-IRR210B); - Input 0-10V: for secondary radiation sensor (SG-IRR0/10) and pyranometer (SG-PYRA-3-AV); - Input PT1 (PT100 or PT1000 (selectable via jumper) two-wire or three wire (selectable via jumper)): for temperature sensor module (SG-PT100-M) and temperature sensor (PT1000-A-SG) ; - Input PT2 (PT100 or PT1000 (selectable via jumper) two-wire or three wire (selectable via jumper)): for temperature sensor module (SG-PT100-M) and temperature sensor (PT1000-A-SG) ; - Input for anemometer: wind speed sensor (SG-ANEMO). |